Northlight's PWM boards receive DMX512 digital protocol and 0-10 VDC.
Home Page DMX to 0-10 VDC converter DMX to Relay driver Convert 0-10VDC to DMX512 protocol. Isolated DMX splitter. DMX to Hobby servo DMX512 AC light dimmer boards DMX512 DC PWM boards Misc items on sale Purchase online using PayPal Application circuits for Encoder and Decoder Notes about DMX 512 protocol Trouble shooting guide. Warranty and disclaimer.
  • The Northlight Systems DMX PWM board is capable of receiving DMX512 signals.
  • The 4 channel PWM board accepts 0-10 VDC and DMX512 on a highest takes precedence basis.
  • Can be ordered to accept 0-5 VDC , no additional cost.
  • Has 4 or 8 on board low RDS MOSFETS's.
  • Additional heatsinks are not necessary.
  • Each channel can drive up to 5 - 1 watt LED's.
  • Address selection has 2 switch options described below.
  • Addresses all 512 channels.
  • Fast 4Khz Pulse width modulation.
  • Can be ordered with Bit Angle Modulation for driving LED's when PWM is not desired.
  • Controls DC motors, LED's and incandescent lamps.
  • Fast RISC microcontroller and Assembly language firmware.
    • Address switch options
    There are 2 options shown below.
    Select a switch type when ordering.
    More about the 4 channel board:
  • Each MOSFET can handle up to 2 Amps
  • Board can handle up to 10 Amps total.
  • Convienient screw terminals
  • Separate power connectors for board power and load power.
    		• Mini DIP Switch
    The Mini DIP switch is mounted on the circuit board.
    Use this when infrequent address changes are needed.
    The address is entered in standard binary code, starting with 0.
    board mounted switch     		Mini DIP Switch, panel mount.
    The Mini DIP switch is mounted on the enclosure panel.
    Includes connecting leads and mounting standoff's.
    The address is entered in standard binary code, starting with 0.
    panel mounted switch
    4 Channel PWM dimmer.
  • Only 2.25" X 2.75".
  • Controls 4 MOSFET based DMX channels.
  • DMX512 control.
  • 0-10 VDC or 0-5VDC input.
  • 2 Amps per channel

    To order online from OUTSIDE the US and Canada  Click here

    Download the manual for the board in PDF format.

    Download a LED current limiting resistor calculator.

    		• Actual size on most screens

    PWM04SA - Mini DIP switch
    Price: $65.00
    To purchase click icon below.

    Input Qty -  

    Please click on shipping option below.


    		PWM04P - Mini DIP sw, panel mount
    Price: $75.00
    To purchase click icon below.

    Input Qty -

    Please click on shipping option below.


    8 Channel PWM dimmer.
  • Only 3.75" X 2.75".
  • Controls 8 MOSFET based channels, starting at the selected address.
  • DMX512 control.
  • Does not accept analog control voltage.
  • 2 Amps per channel

    To order online from OUTSIDE the US and Canada  Click here

    Download the manual for the board in PDF format.

    Download a LED current limiting resistor calculator.

    • PWM08M - Mini DIP switch
    Price: $115.00
    To purchase click icon below.

    Input Qty -  

    Please click on shipping option below.


    		PWM08P - Mini DIP sw, panel mount
    Price: $130.00
    To purchase click icon below.

    Input Qty -

    Please click on shipping option below.


    Other payment options include Company check, Electronic funds transfer, Western Union. Email for more information.
    Click in the "Contact" button for Warranty info.
    COUNTER
    Send  To NorthlightSystems@att.net.
    		Made in the USA.